CS-A50 USER'S MANUAL...
Congratulation for buying our high quality product. It is necessary to read through the manual carefully to find out all features and how to operate this cordless phone. Before first Use Please read IMPORTANT SAFETY INSTRUCTIONS o n pages 25~26before use. Accessories Take out from box: cordless handset, belt clip and base unit, in addition each carton contains the following accessories:...
Battery Charge Note: This device complies with FCC Part 15 regulation. Operation is subject to the following two conditions:(1) this device may not To power the handset, install the battery and charge it for cause harmful interference, and(2) this device must accept any about 24 hours before initial use.
Features equipment, operations or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make 1. FSK standard Caller ID necessary modifications to maintain uninterrupted service. 2.
Location of Controls Customer Information 1.This equipment complies with Part 68 of the FCC rules and the Base Unit requirements adopted b y the ACTA. On bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXX.If requested, this number must be provided to the telephone company.
Handset Do not overload wall outlets and extension cords as this will result in the r isk of fire or electric shock. Never introduce objects into this unit through the slots as this may LED indicator riskinfire orelectric shockhazard. Never spill any liquid on the unit. To reduce the risk of electric shock, do not disassemble this unit, instead take it to a qualified service station for checking .
Important safety instructions When using your telephone equipment, basic safety precautions Belt clip should always be followed to reduce the risk of fire, electric shock nd injury to persons, including following items: 1.Please understand all instructionsin the operation manual. 2. Follow allwarnings a nd instructions markedonthis unit. Unplug this unit from wall outlets and telephone jacks before cleaning.
If you hear noise or static, Move closer to the base unit. Installation keep the base unit away from PCS, during a p hone conversation family videos, game and fax Base unit machines. Press the "CH." key to switch to Connect the telephone line and the power.
Install the battery Troubleshooting (1) Slide the battery (2) Insert the battery (3) Slide the cover compartment cover and connect it with the back until it clicks If you experience trouble with your unit, please check following items downwards. correct polarity contact. into place.
Deleting a single CallerIDnumber LCD Informations 1. Press button, the LCD shows the totalnumber of CID numbers Description: and new numbers.( ALL XXNEW XX 2. Press button to find out thenumber yo u want to delete. In standby mode: In this mode, the LCD will show the handset number, date and realtime.
Press button to dial the number with the 1 digit. OUTOFAREA This message willdisplay when some one calls f rom an area where the telephone company is not offering the caller identification services or is not yet providing name and number delivery to your area via thelong distancenet work.
Handset Settings Caller ID Operation Reviewing the Caller ID list Handset registration 1. Press button, the LCD shows the total number of Caller ID 1. Make sure the base unit is connected into the AC outlet and line numbers andnewnumbers.( ALL XX NEW XX jack.
2. Press button to dial itout. e.g. If you store the area code number 0592, and the incoming call number i s 05926036442, the LCDwillonly show 6036442. Deleting all records form phone book LCD contrast setting Press EDIT TRANS button, then button, and then the current level 1.
NOTE: a. Press button toreviewthe records. 1.If you turn the volume and tone receiving select switch UP, the amplify function are automatically activated each time you use the MEMO b. Enter the caller's name, then press button to review the phone.
Phone Book Basic Function Storing names and numbers to phone book To make a call You canstoreup to 60namesandnumbers in thememory. 1. Press button and wait for a dial tone. 1. Adding names and numbers to phone b ook: 1. Instandby mode, input the number you want tostore by keypad. 2.Dial the telephone number.
Last number redial Out of range warning Press button, then p ress button to redial the lastdialled number. In talk mode, if the handset is too far away from base unit, an out of range warning tone will be heard. The user should move closer to the CH CODE button base unit.