Pioneer CS-A50 User Manual page 13

2. Press button to dial itout.
Deleting all records form phone book
1. In standby mode, press MEMO
number of records.
R
2. Press buttontwice, then all of the recordswillbedeleted.
Deleting a single record form phone book
1. Find o ut the record youwant to delete. Please see "Reviewing names
and numbers inphone book"for details.
R
2. Press buttontwice, then the record will bedeleted.
VIP and REJECT function
If you store a name ending with *, itwill be a
name endingwith #, itwillbea
When a VIP number is received, the ringer will ring though the ringer
function on handset is deactivated.
When a REJECT number isreceived, the ringer will not ring though the
ringerfunctionon handset is activated.
19
button, then the LCD shows the total
VIP number. If you s tore a
REJECT
number.
e.g. If you store the area code number 0592, and the incoming call
number i s 05926036442, the LCDwillonly show 6036442.
LCD contrast setting
Press EDIT TRANS button, then
contrast adj X(X=1,2,3,4) will show on the LCD. Press
get the desired level and press
confirm and exit.
Ringer setting
Press EDIT TRANS button, then
will show on the LCD. Press
RING ON/OFF
activate/deactivate the ringer function. Press
once more to confirm and exit. A confirmation beep will be heard.
Time setting
Press EDIT TRANS button, then
show on the LCD and the digit for
button to get the desired digit then press
confirm and enter the next item(the sequence is
MINUTE ). After the setting, press
confirmation tone will be heard.
Receiving volume and tone setting
You can increase the volume and adjust the receiving tone according
to your own hearing requirements. The
select switch in the battery compartment allow extra-receiving and
tone function to be activated or not during the conversation. If you
turn the volume and tone receiving select
function will be active and the LED indicator will lit up, you can adjust
the receiver tone and receiver volume button to get the desired
receiving level.
12
2 button, and then the current level
or button to
s t
EDIT TRANS button once more to
3 button, and then the current mode
or button to
s t
EDIT TRANS
4 button, and then the
SET TIME
MONTH will flash. Press
s
EDIT TRANS button to
MONTH-DAY-HOUR-
EDIT TRANS
button to confirm and a
volume and tone receiving
switch up, the amplify
button
will
or
t