Celluon Magic Cube User Manual page 9

 Adjusting keyboard brightness
 Press and hold "FN" key and press right arrow key to increase brightness.
 Press and hold "FN" key and press left arrow key to lower brightness.
 There are three levels of brightness. Default brightness is set at second level during
power on.
Note: FN key is not a repeat key. FN key must be clicked once for each adjustment.
 Connecting to iPhone and iPad
iPhone and iPad connects to Magic Cube via Bluetooth HID and a driver is not required.
1) Make sure the Magic Cube is on a HID mode. (Sliding button should be pushed
to 'up' position).
2) Turn on Magic Cube by sliding the power button to the right. A blinking blue
LED indicates that the device is ready to pair.
3) On iPhone/iPad, tap on Settings-General-Bluetooth.
4) Turn Bluetooth on by tapping the ON button.
5) iPhone/iPad will now search for pairing device.