Keurig B81 Owner's Manual page 7

Set-Up & First Brew (continued)
SECTION 1
5.
6.
a.
b.
c.
Place a K-Cup portion pack in the K-
Cup Holder (fig. 6).
CAUTION: There are two sharp needles
that puncture the K-Cup, one above the
K-Cup Holder and the other in the
bottom of the K-Cup Holder. To avoid
risk of injury, do not put your fingers in
the K-Cup Assembly Housing.
Lower the Handle to close the Lid over
the K-Cup Holder. (When it is closed
completely, the Touch Screen will
indicate "READY TO BREW").
All brew size icons are lit with the default
size is illuminated (fig. 7). To choose a
different size, press the cup icon of your
choice.
NOTE: The Small Mug (7.25 oz.
serving) is the factory set default brew
size. To program your favorite brew size
see page 11 "How to Program the Favorite
Button 1 & 2".
Your choices are an Extra-Small Cup
(3.25 oz serving), Small Cup (5.25 oz.
serving), a Small Mug (7.25 oz. serving),
a Large Mug (9.25 oz. serving) or a
Travel Mug (11.25 oz. serving).
The strength of the brew can be
controlled by selecting the Regular or
Strong selections on the Touch Screen.
If you wish to have a more robust cup of
coffee select the Strong setting. This
unique "pulsating" brew setting slows
down the brewing process to allow the
water to have more contact time with the
coffee grinds.
7
NOTE: The Strong brew strength setting takes
longer to brew compared to the Regular brew
strength setting.
SPECIAL NOTE: For "Deluxe K-Cups" there
are programmed recipes and the touch screen
may differ from normal operation – please review
the insert sent with the K-Cups for information.
Once size is chosen, press the BREW
d.
Button. BREW Button will stop flashing.
The Touch Screen will now display the
7.
word 'BREWING' (fig. 8).
CAUTION: There is extremely hot water
in the K-Cup Holder during the brew
process. To avoid risk of injury, do not
lift the Handle or open the K-Cup
Assembly Housing during the brew
process.
There may be a short pause prior to
8.
coffee being dispensed. The entire brew
process lasts for approximately 1 minute
and ends with a burst of air to remove
all liquid from the K-Cup.
Lift the Handle, remove and dispose of
9.
the used K-Cup.
CAUTION: K-Cup will be hot.
Enjoy your first cup of Keurig Brewed®
10.
gourmet coffee, tea or hot cocoa!
Your Brewer may display "NOT READY"
11.
as it heats water for the next brew cycle.
The "READY TO BREW" and
"HEATING" indication will return to the
Touch Screen in about 15 seconds.