Table of Contents
Advertisement
Verify the Adapter Installation (Oracle Solaris x86)
Note -
1.
Holding the optical transceiver by the edges, align the transceiver with the slot
in the adapter and slide the transceiver into the opening.
Applying even pressure at both corners of the transceiver, push the transceiver
2.
until it is firmly seated in the slot.
3.
Repeat
4.
Power on the server.
5.
Verify the adapter installation.
Follow the instructions in the appropriate section:
"Verify the Adapter Installation (Oracle Solaris x86)" on page 36
■
"Verify the Adapter Installation (Linux)" on page 37
■
"Verify the Adapter Installation (Windows)" on page 37
■
Related Information
"Cable and Transceiver Overview" on page 32
■
"Adapter Description" on page 32
■
"Install the Adapter" on page 34
■
Verify the Adapter Installation (Oracle Solaris x86)
1.
Power on the server, and then boot the server.
2.
Check the version of the Oracle Solaris SRU.
You must have at least Oracle Solaris 11.3 SRU23 installed. For example:
$ pkg info entire
Name: entire
Summary: entire incorporation including Support Repository Update
...
<output omitted>
...
Version: 0.5.23 (Oracle Solaris 11.3.23.1.0)
36
Oracle Dual Port 25 Gb Ethernet Adapter User's Guide • September 2017
There are two QSFP connector ports, port 1 (A) and port 1 (B).
Step 1
and
Step 2
to install the second optical transceiver.
(Oracle Solaris 11.3.23.1.0).
Advertisement
Table of Contents
