Configuring The Network - Oracle Dual Port 25 Gb User Manual

Configuring the Network

These topics describe how to configure the network for the adapter:
Description
Configure the network interface.
Boot over the network.
Install and Verify RDMA on Converged
Ethernet.
Related Information
"Updating Software and Firmware" on page 23
■
"Installing the Driver" on page 25
■
"Installing the Adapter" on page 31
■
"Configuring Driver Parameters" on page 51
■
"Configuring Jumbo Frames" on page 55
■
"Configuring a Link Aggregation (Oracle Solaris x86)" on page 59
■
"Configuring VLANs and VXLANs" on page 63
■
"Troubleshooting the Adapter (Oracle Solaris x86)" on page 75
■
Links
"Configure the Network Interface (Oracle Solaris
x86)" on page 40
"Configure the Network Interface (Windows)" on page 40
"Boot Options" on page 41
"Boot Over the Network (PXE)" on page 41
"Boot Over a 10GbE Network (Oracle Solaris x86 and
Linux)" on page 42
"Install RoCE (Linux)" on page 45
"Install RoCE in Windows Kernel Mode" on page 46
"Install RoCE in Windows User Mode" on page 47
"Install RoCE in VMware ESXi" on page 47
"Verify RoCE in Windows" on page 48
Configuring the Network 39