Honda GX120UT2 Service Manual page 117

FUEL SYSTEM
LOW PROFILE TYPE
(*) R efer to page of base shop manual (GX120UT2/
160UT2/200UT2).
G asoline is highly flammable and explosive . Y ou
can be burned or seriously injured when handling
fuel .
• K eep heat , sparks , and flame away .
• H andle fuel only outdoors .
• W ipe up spills immediately .
T o prevent serious eye injury , always wear safety
goggles or other eye protection when using com -
pressed air .
R emove the carburetor ( page 6-10*).
B efore disassembly , clean the outside of the carburetor .
PILOT JET SET
ASSEMBLY:
B efore installing , clean
thoroughly with low - pressure
compressed air .
L ightly lubricate the O- ring
[1] to ensure easy installation
into the carburetor body .
PILOT SCREW
REPLACEMENT: ( page 6-13*)
MAIN NOZZLE
ASSEMBLY:
UPPER
B efore installing , clean SIDE
thoroughly with low -
pressure compressed air .
MAIN JET
ASSEMBLY: UPPER
B efore installing , clean SIDE
thoroughly with low
compressed air .
FLOAT CHAMBER
ASSEMBLY:
I nstall the float chamber to the
carburetor body at an angle as shown .
O-RING
THROTTLE STOP SCREW
[1]
ADJUSTMENT: ( page 3-13*)
LIMITER CAP
PILOT SCREW SPRING
FLOAT PIN
300°
SET BOLT GASKET
T ampering is a violation of F ederal and
C alifornia law .
VPM5 type :
CHOKE LEVER
FUEL
STRAINER
SPRING PIN
CARBURETOR BODY
FLOAT VALVE SPRING
DRAIN SCREW
SET BOLT
CLIP
FUEL TUBE
FUEL TUBE
FUEL RUBBER
FLOAT VALVE
INSPECTION: ( page 6-13*)
FLOAT
O-RING
DRAIN SCREW GASKET
CLIP