Related Manuals for Orion 215LEDP
Summary of Contents for Orion 215LEDP
- Page 1 LED CCTV MONIOR INSTRUCTION MANUAL Please read this manual thoroughly before use, and keep it handy for future reference. 1 / 12...
-
Page 2: Table Of Contents
CONTENTS 1, General information ....................3 1.1 Product description and type of use ..................3 1.1.1 General features .......................3 1.2 Opening the box........................3 1.2.1 Contents of the box ......................3 1.3 Warnings..........................3 1.3.1 Power ..........................3 1.3.2 Safety precautions......................3 1.3.3 Installation precautions....................... 4 1.3.4 Cleaning the device...................... -
Page 3: 1, General Information
1. GENERAL INFORMATION Dear Customer, Thank you for having purchased this product. This document describes how to install and use the LED backlit LCD color monitor. Read this manual which contains information for correct, safe use carefully. Keep this manual at hand so that you can refer to it when needed. 1.1 PRODUCT DESCRIPTION AND TYPE OF USE The LED backlit LCD color monitor presents a very rugged structure. -
Page 4: Installation Precautions
Never open the device. In all cases, contact the qualified personnel or authorized service center for repairs. Keep the device away from children, to prevent accidental damage. Do not touch the device with wet hands to prevent electrical shock or mechanical damage. -
Page 5: 2, Interfaces, Controls & Settings
2. INTERFACES, CONTROLS & SETTINGS Interfaces instruction DC12V The main power input of monitor, DC12V HDMI IN The HDMI Input Source VGA IN The VGA Input Source BNC 1(CVBS) IN The BNC Input for CVBS Source BNC 2(CVBS) Out The BNC Looping output for CVBS Source 5 / 12... - Page 6 1, Source 5. Power Select an input source Monitor power on / off 2. Menu 6. LED Indicator Enter the MENU, save theadjustment Green color: monitor on of sub-menuand exit the OSD Red color : monitor off 3. Left & Right (VOL) 7.
- Page 7 5. Press the MENU button to confirm the adjustment on sub-MENU. 6. Press the MENU button to exit the sub-MENU and go back to the main-MENU. 7. Press the MENU button to exit the OSD MENU. No Signal Input, please check with the input Sources of the monitor. Press 'SOURCE' button on monitor or 'INPUT' button on remote controller.
-
Page 8: 3, Osd Menu Controls
If you connect any input source, monitor will display current input source resolution and frequency. 3.OSD MENU CONTROLS A. PICTURE Option Function Value Picture Mode Adjust the image color setting. See table below Contrast Adjust the contrast 0 ~100 Brightness 0 ~100 Adjustthe brightness Color... -
Page 9: B.pc
Color Temperature Medium Give the white color a neutral tint Warm Give the white color a reddish tint User Set custom color temperature Cool Give the white color a blue-ish tint 1) To set custom color temperature (R,G,B values), select "USER" to set color temperature. Keep pushing 'Down' button on the monitor or theremote controller, then you will see Red, Green and Blue option. -
Page 10: Sound
Option Function Value Auto Adjust Fit the image setting automatically Horizontal Pos. Adjust the horizontal position of picture 0 ~100 Vertical Pos. Adjust the vertical position of picture 0 ~100 Size Adjust the display size 0 ~100 Phase Reduce video distortion and instability components 0 ~100 C. -
Page 11: Setting
D. SETTING Option Function Value OSD Language Set the language of the OSD menu English, Chinese Restore User Default Reset the monitor settings to the factory default No Signal Screen Show the color when there is “No signal” Blue, Black No Signal Standby Standby power when there is “No signal On, Off... -
Page 12: 4, Specification
4.SPECIFICATION Size & Type 19.5” 21.5” 23.6” Panel Type 19.53” LED Backlit Monitor 21.5” LED Backlit Monitor 24” LED Backlit Monitor 0.2482 H x 0.2482(V) Pixel Pitch 0.2265 H x 0.221(V) mm 0.277 H x 0.277(V) mm Brightness (Max) 220cd/m 250cd/m 250cd/m Contrast Ratio...