Table of Contents
Advertisement
Image 21: Web Panel OpenVPN Network
Parameter
a "Netmask" and a "Broadcast" address, this is similar to the
configuration of the "Server Parameter". The Limit of "Max. Clients"
specifies how many stations may establish simultaneous connections to
the NetCom; it does not limit the number of installed clients. If
OpenVPN is configured for Server-Client mode, it will establish a
connection to a given Server, e.g. another NetCom. The "TCP Port" and
the "IP Address" of the Destination are required.
Different grades of "Encryption" are available, from
no encryption at all to AES with a 256 bit key. Select
the required grade of security, and open the
"Configuration-Settings of the Encryption-Key" to
open a window for the parameters.
Image 23: Web Panel OpenVPN Key Configuration
This window is for Key management. The NetCom allows to
"Generate" a new key from Random Data. This key is the displayed in
the browser window. Depending on the configuration of your
823RM WLAN, 1623RM WLAN
Of course "OpenVPN" may be
, active as Server or
Disabled
in
the
combined
Client mode. When the function
is active, the NetCom is virtually
invisible
on
defined in Server Parameter. It will
still answer on ICMP, and also the
Logging function is available.
There is only one connection
accepted by the NetCom, to the
"TCP Port"
OpenVPN™.
There is nothing more available.
The "IP Address" is the local
address on the VPN, it should be a
private address. This VPN also has
Server-
the
IP-Address
defined
for
Image 22: Web
Panel OpenVPN
Encryption grades
30
Page
Advertisement
Table of Contents
Need help?
Do you have a question about the netcom 123 and is the answer not in the manual?
Questions and answers