Removing A Jammed Laminating Pouch; Cleaning - ALDI OL 350-L-17 User Manual

Cleaning

Removing a jammed laminating pouch

The laminator is equipped with an antiblocking system. If the laminating pouch was
not inserted straight or it becomes jammed in the laminator, proceed as follows:
1. Move the ABS switch
it down (see fig. B).
2. Pull the laminating pouch
It is recommended you pull the laminating pouch out in the direction
of its larger end.
You can place the document in a new laminating pouch and laminate it again.
Cleaning
WARNING!
Burn hazard!
The laminator will become hot during operation. You may burn
yourself.
− Always let the laminator cool off completely before you clean it.
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Never submerge the laminator in water.
− Make sure that no water penetrates the housing.
NOTICE!
Risk of damage!
Improper handling of the laminator may result in damage to the
laminator.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, sharp or metallic cleaning utensils such as
14
4
towards the laminating pouch infeed slot
6
out of the laminator.
2
and hold