Setting Up The Laminator; Activating / Deactivating The Laminator; Operation - ALDI OL 350-L-17 User Manual

Operation

1. Take the laminator out of the packaging.
2. Check whether the laminator or the individual parts exhibit damage. If this is the
case, do not use the laminator. Contact the manufacturer at the service address
specified on the warranty card.
3. Check to make sure that the delivery is complete (see fig. A).

Setting up the laminator

1. Position the laminator so that there is enough space to insert a laminating
pouch 6 . Do not position the laminator directly in front of a wall or other
objects.
2. Connect the mains plug to a properly installed socket with a protective conductor
(AC 240 V, 50 Hz = house connection).

Activating / deactivating the laminator

1. Move the ON / OFF switch
The ready indicator
has reached the correct temperature for lamination.
The preheating time may vary depending on the ambient
temperature and air humidity.
2. Move the ON / OFF switch to "OFF" ( ) to switch the laminator off.
Operation
WARNING!
Risk of injury!
Handling the laminator improperly may result in injury.
− If an object (sleeves, tie etc.) is unintentionally taken into the
laminating pouch infeed slot, immediately disconnect the
mains plug.
NOTICE!
Risk of damage!
Improper handling of the laminator may lead to damage to the
laminator or documents.
12
3
to "ON" (―) to switch the laminator on.
1 will turn from black to red once the laminator