Presetting Channels Manually - Sony Trinitron Operating Instructions Manual

Presetting channels manually

1
Press SELECT on the remote commander or
the TV until "MANUAL PROGRAM" appears
on the screen.
SELECT
SELECT
or
2
Press +/– on the remote commander or
.
+/– on the TV.
or
3
Press PROGR +/– or number buttons on the
remote commander or PROGR +/– on the TV
until the required program position
appears on the screen.
PROGR
1 2
or
4
5
7 8
÷
0
4
Press +/– on the remote commander or
.
+/– on the TV until the required channel
picture appears on the screen.
or
5
Press SELECT on the remote commander or
the TV.
SELECT
SELECT
or
MANUAL PROGRAM
PROGR
3
or
6
9
VHF LOW B/G
1
Disabling program positions
1
Press PROGR +/– or number buttons on the
remote commander or PROGR +/– on the TV
until the unused or unwanted program
position appears on the screen.
2
Press SELECT on the remote commander or
the TV until "MANUAL PROGRAM" appears
on the screen.
3
Press +/– on the remote commander or
.
+/– on the TV.
4
Press PIC MODE on the remote commander.
5
Press SELECT on the remote commander or
the TV.
To preset the disabled program position again
Preset the channel quickly, automatically or manually.
7
-GB
Getting Started