Bissell SMARTCLEAN 1974 Series User Manual page 12

Manual Cleanings Using Control Panel
Selecting a
Cleaning Time Control Panel Display
1st Press
2nd Press
3rd Press
4th Press
5th Press
6th Press
7th Press
8th Press
Note: Use the highlighted settings for optimal performance if the docking station is
not setup or on a different floor of the home.
Selecting the
Navigation Control Panel Display
1st Press
2nd Press
3rd Press
4th Press
5th Press
Selecting the
Cleaning Power Control Panel Display
1st Press
2nd Press
Display on screen What It Does
The trash can indicator shows the dust bin is full and needs to be
emptied
www.BISSELL.ca
12
What It Does
Maximum run time - will return to the
docking station to recharge
30 minute run time - will return to the
docking station to charge
45 minute run time - will return to the
docking station to charge
60 minute run time - will return to the
docking station to charge
Sends robot back to the docking station
without cleaning
30 minute run time - will not return to the
docking station
45 minute run time - will not return to the
docking station
60 minute run time - will not return to the
docking station
What It Does
Spiral - Robot will work in circles until it
encounters an obstacle (once it encounters
an obstacle it will switch to AUTO mode)
Along the Wall - Robot will clean along
walls and edges
"Z" Formation - Robot will move up and
down the room following a zig-zag path
Diagonal Path - Robot will move in diagonal
paths around the room, adjusting its
direction as obstacles are encountered
Auto - Robot will cycle through all modes
(Spiral, Along the Wall, "Z" Formation, and
Diagonal Path)
What It Does
Cleaning power is set to Normal
Cleaning power is set to Turbo