Bissell SMARTCLEAN 1974 Series User Manual page 10

SmartClean and Dark or Black Surfaces
NOTE: Be
aware that
shiny surfaces
and dark floors
might confuse
your robot.
IMPORTANT! SmartClean may not run on certain dark or black colored
surfaces. The cliff sensors that recognize an edge or a stair may view this
color as an edge and will not clean over it.
TIP! If you encounter this situation, place an Invisible Wall 6 inches from the
edge of the stairs to prevent the robot from going over the stairs.
Initiating SmartClean While Docked
To initiate the SmartClean Robot while docked, Press and Hold the
on the Robot control panel for 5 seconds. When the robot powers up release the
button and the SmartClean will clean according to the Selected Cleaning Time.
www.BISSELL.ca
10
button located