Senor Tech iSPOS User Manual page 2

SAFETY STATEMENTS
Product Name : iSPOS
The following standards are applied only to the equipments that are
so labeled.
Europe :
North America :
National :
CE Marking
The equipment conforms to the following Directive and Norms.
EMC Directive 89/336/EEC - EN55022 Class
B;EN55024;EN61000-3-2;EN61000-3-3.
Low Voltage Directive 73/23/EEC – Safety:EN60950-1.
Federal Communications Commission statement
This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
CE marking, TUV/GS : EN60950-1
EMI : FCC Class B
IEC 60950-1
SENOR TECH CO., LTD.
iSPOS User's manual
2