Siemens MC60 User Manual page 44

of MC60 Maguro, kurz, am, A31008-H5760-A40-1-4A19 (08.08.2003, 12:31)
left page (44)
44 Setup
Enter the phone number
to which the caller will be
diverted (if not already
entered).
Confirm. After a short
§OK§
pause, the setting is
confirmed by the
network.
All calls
All calls are diverted.
Symbol in the top line of
the display in standby
mode.
Other possibilities for divert:
Not reachable,
fax, Receiving data
Status check
You can check the current divert
status for all conditions.
After a short pause, the current
situation is transmitted by the
network and displayed.
Condition set.
Not set.
Display if status is
unknown (e.g. with a new
SIM card).
Clear all
All set diverts are cleared.
No reply, Busy, Receiving
Fact. settings
Reset phone to default values
(factory setting).
Filesystem
Format the file system (p. 54)
(Format) and delete (not Phonebook)
or defragment all stored data
b
up).
Phone identity
Display the phone identity number
(IMEI) and software version.
Auto off
The phone switches off each day at
the set time.
Clock
¢
§Menu§
function.
Time/date
The clock must be set to the right
time once at start-up.
First enter the date, then
§Change§
the time.
Additional information
b
If the battery is removed for longer than 30
seconds, the clock must be reset.
Time zones
Set the time zone for where you
currently are .
(Clean
¢ ¢
Select
Clock