Windows - Samsung ML-2525W series User Manual

Windows

You can install the machine software using the typical or custom method.
The following steps below are recommended for most users who use a
machine directly connected to your computer. All components necessary for
machine operations will be installed.
1. Make sure that the machine is connected to the computer and powered
on.
If the "Found New Hardware Wizard" window appears during the
installation procedure, click Cancel in close the window.
2. Insert the supplied software CD into your CD-ROM drive.
• The software CD should automatically run and an installation window
appears.
• If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter which represents
your drive. Click OK.
• If you use Windows Vista, Windows 7 and Windows 2008 Server R2
click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing "X" with the letter which represents
your drive and click OK.
• If the AutoPlay window appears in Windows Vista, Windows 7 and
Windows 2008 Server R2, click Run Setup.exe in Install or run
program field, and click Continue or Yes in the User Account
Control windows.
3. Select Install now.
If necessary, select a language from the drop-down list.
• The Wireless Setting and Installation allows you to install a
wireless network to connect to the machine with USB cable.
(See "Setting a wireless network with USB cable" on page 2.)
• The Advanced Installation has two options, Custom
Installation and Install Software Only. The Custom
Installation allows you to select the machine's connection and
choose individual component to install. The Install Software
Only allows you to install the supplied softwares, such as
Smart Panel. Follow the guide on the window.
4. Read License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
The program searches the machine.
If your machine is not found in the network or locally, the following
window will appear.
• Check if you want to install the software without
connecting the printer to the network or locally.
-
• Search again
When you press this button, the firewall notice window
appears;
-
-
• Direct Input
The Direct Input allows you to search a specific machine on
the network.
-
Getting started_ 25
Check this option to install this program without a machine
connected. In this case, the print a test page window will be
skipped, and completes the installation.
Turn off the firewall and Search again. For Window
operating system, click Start > Control Panel > Windows
Firewall, and inactivate this option. For other operating
system, refer to its on-line guide.
Turn off the firewall from the third party's program beside
the operating system. Refer to the manual provided by
individual programs.
Search by IP address: Enter the IP address or the host
name. Then click Next.