Huawei AP6050DN Product Description page 19

AP6050DN&AP6150DN
Product Description
As shown in Figure 2-4, each port can be described as follows:
1.
2.
3.
4.
5.
6.
7.
8.
9.
LED Indicators
Type
Default status after
power-on
Software startup
status
Running status
Issue 01 (2016-05-31)
Default button: restores factory settings if you hold down the button more than 3
seconds.
USB port: connects to a USB flash drive to extend the storage space of the AP, and
provides a maximum of 2.5 W power.
Console port: connects to the maintenance terminal for AP configuration and
management.
Ground screw: connects the AP to a ground cable.
GE1: 10/100/1000M port used to connect to the wired Ethernet.
GE0/PoE: 10/100/1000M port used to connect to the wired Ethernet. The port can
connect to a PoE power supply to provide power for APs.
Input port for 12 V DC power supply.
Lock port: protects the AP against theft.
Antenna port: connects to an external antenna for transmitting and receiving service
signals.
Indicator colors may vary slightly at different temperature.
Color
Green
Green
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status
Steady on
Steady on after
blinking once
Blinking once every
2s (0.5 Hz)
2 Hardware Structure
Description
The AP is just
powered on and the
software is not
started yet.
After the system is
reset and starts
uploading the
software, the
indicator blinks
green once. Until the
software is uploaded
and started, the
indicator remains
steady green.
 The system is
running properly,
the Ethernet
connection is
normal, and
STAs are
associated with
the AP.
 The system
enters the Uboot
CLI.
14