5 Installation
You can put the device on a flat surface with the magnetic base or install it on the wall or the
ceiling. Please check the details as below:
Notice: a. Before installation, please make sure the device is close to the power socket.
b. Before secure the pin and the screw, please drill holes on flat and solid surface.
5.1 Wall mounting
5.1.1 Remove the pin from wall-mount; Push the pin according to the position as below.
5.1.2 Drill holes
Drills holes on the wall according to the position of the pin holes.
5.1.3 Secure the pin to the wall
Place two setscrews into the holes, then secure the pin to the wall with the two screws.
5.1.4 Secure the device on the wall mount; Secure the device and the pin.