Table of Contents
Advertisement
Quick Links
JH08 Wireless Home Monitor
User Manual
(Version: V0.2)
Prior to use, please read this manual thoroughly to ensure fast and effective installation. Final
Appearance, color and accessories are subject to change without notice.
Advertisement
Table of Contents
Related Manuals for Jimi JH08
Summary of Contents for Jimi JH08
-
Page 1: User Manual
JH08 Wireless Home Monitor User Manual (Version: V0.2) Prior to use, please read this manual thoroughly to ensure fast and effective installation. Final appearance, color and accessories are subject to change without notice. - Page 2 1 Accessories Check the product and accessories as below to see if they are complete, otherwise please contact your local supplier. Magnetic base Camera body Wall mount (Optional) Charger Power cable Setscrew ×3 Screw ×3 (Optional) (Optional)
- Page 3 2 Specifications Type JH08 IR Network Interface WiFi (IEEE802.11b/g/n) 32bit RISC SoC Processor Image Sensor 1/4"Color CMOS Sensor1.3 Megapixel Image Resolution HD 720P(1280*720), WVGA(854*480) Camera Lens Aperture F2.8, 127° wide angle Video Compression Format H.264 Built-in microphone and speaker, voice monitor, snapshot,...
- Page 4 3 Structure Camera LED indicator Magnetic base Power input Speaker Micro SD slot 3.2 LED indicator status Status Meaning Blue constant on AP setting mode Blue flashing slow WIFI connection normal...
- Page 5 4 Operation 4.1 Connect with power 1 Connect with the power cable and charger 2 The Blue LED indicator will be flashing slowly if the device is connected successfully with the WIFI network. If the Blue LED is constant on, it means the WIFI network is not set correctly or there is no WIFI, and it will enter into AP setting mode.
- Page 6 A Create Account...
- Page 7 B Log In C Recover password...
- Page 8 D Email Validate...
- Page 9 3 After effective connection, click to add camera.
- Page 10 4 Select WIFI and confirm by clicking Select your camera and start setup.
- Page 11 5 Personalize the environment of the camera...
- Page 13 6 Click camera to enter Live-monitor; Press and hold to talk to the camera; Click to turn ON/OFF voice monitor; Click to take a snapshot; Click to take video manully; Click to check alerting report, video and snapshot; Double click the screen or click to switch screen orientation.
- Page 14 Press and hold the screen to delete the target camera. Unbinding the camera will ask for account and password information and restore to AP mode again.
- Page 15 at front page to enter drawer layout page. “Account” and “About” information 8 Click could be checked here.
- Page 16 A) Account: Log out, change password and choose network model Wifi-Only Live-monitor and Playback only with available WIFI Always Live-monitor and Playback with WIFI or mobile network; Never Live-monitor and Playback is never allowed.
- Page 17 B Change password C About: Version check and update for APP...
- Page 18 9 Click on Live-monitor page to access Album, Alarms and Fulltime video. Album includes snapshot and manual video. Alarms includes motion detection alarm and voice detection alarm. Click the video to playback. 10) Click on the Live page to enter Setting page.
- Page 20 A Camera setting...
- Page 21 B WIFI setting...
- Page 22 C) Camera Reboot D Alert settings...
- Page 25 E Notification Mode Alarm notification pushed to the mobile phone F Recording settings Alarm setting and schedule could be checked in Gallery page G DROPBOX Settings DropBox identification means DropBox would ask for a temporary code...
- Page 26 to enable your upload. Prior the setting please create an account on DropBox official web, which enables you to upload alarm picture and video to Dropbox cloud storage.
- Page 27 H Camera details...
- Page 28 I Timezone setting...
- Page 29 5 Installation You can put the device on a flat surface with the magnetic base or install it on the wall or the ceiling. Please check the details as below: Notice: a. Before installation, please make sure the device is close to the power socket. b.
- Page 30 5.1.5 Secure the wall mount to the pin 5.2 Celling installation Notice: Please set “Video flip” in the APP’s “Camera setting” if installed in on the ceiling, otherwise the image will be back side down. 5.2.1 Use a slot type screwdriver to take out the top cover gently and review the screw hole.
- Page 31 5.2.2 Drill holes on the ceiling according to position of the magnetic base. 5.2.3 Secure the magnetic base onto the ceiling Use one setscrew and one screw to secure the magnetic base to the ceiling. 5.2.4 Press back the circle top cover 5.2.5 Place the device onto the magnetic base, and then adjust the angle to a proper position.
- Page 32 6 Trouble shooting During operation if any problem appears, please read the following table and contact your local supplier if the problem remains unsolved. Common errors Possible Causes Solutions Confirm the device is connected Device not in WIFI to WIFI successfully WIFI network error Check WIFI status Connection failed...