Control Functions - Dimplex XLE050 Instruction Manual

Control Functions

The heater controls can be easily adjusted by using the six buttons on the User Interface.
The Display Screen shows the options available at each stage of adjustment.
1
Menu - displays the main options list;
2
- Date/Time - Set the date and time.
- Mode - Set the mode of operation.
- Options - Keypad sound, daylight savings time, communication settings and service
information.
Back returns to the previous programming stage.
3
The UP and DOWN buttons are used to navigate through the menus and alter setting values.
4
The UP and DOWN buttons are also used to adjust the required room temperature on the
main screen. The screen colour changes based on the temperature selected, showing deep
blue through to bright red.
Enter is used within the menu options to confi rm settings. On the main screen pressing
5
Enter will display the enabled features.
The timed periods during which the heater is providing heat are defi ned as 'Comfort On'
(this is displayed at the bottom of the screen).
Outside of heating periods the heater will not deliver heat and these periods are called
'Comfort Off '.
While constant heat modes are active, the mode of operation is displayed at the bottom of
the screen e.g. 'Out All Day'.
The Advance button overrides the heating settings and changes the operational state of
6
the heater. Pressing Advance will cause the heater to remain on until the next Comfort Off
period is due, or off until the next Comfort On period is due.
17