Ryobi P552 Operator's Manual page 17

INSTALLING BATTERIES FOR LASER
See Figure 21.
The laser battery compartment is located inside the battery
port for the 18 volt battery pack.
 Loosen the screw from battery compartment cover using
the Phillips end of the supplied blade wrench. Remove
cover and set aside.
 Install two AAA batteries according to polarity indicators
on the battery compartment cover.
 Replace the battery compartment cover. Reinstall screw
and tighten securely.
DANGER:
Laser radiation. Avoid direct eye contact with light source.
WARNING:
Use of controls or adjustments or performance of pro-
cedures other than those specified herein may result in
hazardous radiation exposure.
ASSEMBLY
BATTERY
COMPARTMENT
COVER
BATTERIES
17 – English
LASER GUIDE
SWITCH
Fig. 21