Table of Contents
Advertisement
SECTION 3 - REMOTE CONTROL SYSTEM
The Remote Control System consists of the Master Controller and the Joystick. This system is compatible with 12 VDC
through 24 VDC systems without modification.
SECTION 4 - JOYSTICK
Flush Mount
Cut a round hole of 7/8" in the surface, peel off protective covering of hi-bond tape from the mounting plate. Use the
supplied prep on the mounting surface, place and press the Joystick in place.
Connecting to the Master Controller
The Joystick communicates with the Master Controller via its supplied cable.
Simply connect it in place on the Master Controller.
Additional Joysticks (up to three) may be used with one (1) Master Controller.
JOYSTICK TOP VIEW
JOYSTICK CONNECTION
5
Advertisement
Table of Contents
