Turn On/Off The Speaker - SoundLogic SBS-6/6096 Instruction Manual

Turn On/Off the Speaker

Press and hold the "Power" button for 2-3 seconds until you hear the message "It
is pairing, waiting for device connecting" from the speaker. Your speaker is now
ON and is entering "pairing" mode.
Press and hold the "Power" button for 2-3 seconds until you hear a unique tone
to indicate that the speaker has turned OFF.
Turn the speaker to Bluetooth pairing mode
Press and hold the "Power" button for 2-3 seconds until you hear the message "It
is pairing, waiting for device connecting" from the speaker. Your speaker is now
ON and is now in "pairing" mode.
(Note: The speaker will first search for previously paired devices. It will
automatically pair after finding a previously paired device. If unable to pair with a
device, it will automatically turn off after approximately 10 minutes.)
Pairing your device with Bluetooth Speaker
Your Wireless Shower Speaker can wirelessly stream audio from any Bluetooth
enabled device within 27-33 feet. Simply follow the steps below.
1. Turn the speaker ON and the blue LED light will blink.
2. Enable the Bluetooth feature on your smartphone, tablet or computer.
3. It will search for various devices.
4. The pairing name of the Bluetooth Speaker is "SL SHOWER SPKR." Pair it
with this device.
5. If a password is required, enter '0000' to finalize pairing.
6. Once paired successfully, the blue LED light will flash slowly.
7. If you fail to pair it within the allotted time frame or you want to pair it with a
different Bluetooth device, please follow the steps outlined above.
Select your favorite song on the Bluetooth device to play it through the Wireless
Shower Speaker.
5