Snap The Charged Monitor To Strip For The First Time - Preventice Solutions BodyGuardian HEART Instruction Manual

1. Line up snaps
2. Align logos
3. Connect snaps
GETTING STARTED
Snap the charged monitor to a
Strip for the first time
1. Line up the snaps on the monitor and the Strip.
2. The snaps aren't evenly spaced. To make sure
the snaps are lined up, the orientation of the
logo on both the monitor and the Strip must be
the same.
3. Press firmly to securely connect all four snaps
one by one.
4. Firmly snap the second
monitor into the plugged-
in charging cradle so it is
charged and ready when
you switch monitors.
• The amber battery light on the monitor will
come on while it is charging.
• All monitor lights will go out when the monitor
is fully charged.
7