Preventice Solutions BodyGuardian Verité Quick Start Manual

Quick Hook Up Guide and
Patient Check List
1

Attach the electrodes

All leads should be put on
monitor. The order of lead placement is
correct order every time the leads are attached.
1.
black
Attach the
widths below the left collarbone.
2.
Attach the red
breast and to the outer ribcage (bone part of the ribs).
3.
Attach the white
widths below the right collarbone.
4.
Lastly, attach the
under the breast and to the outer ribcage (bone part of the ribs).
1
LEFT
2

Activating the monitor

Once all four leads are properly connected, sit down and remove the
Tab from the monitor. Remain still for the
You will hear a ring tone to confirm the monitor is powered on correctly.
The monitor will automatically proceed to the "Monitoring" screen.
Caution: U.S. Federal law restricts this device to sale by or on the order of a physician.
© 2017 Preventice Solutions or its affiliates. All rights reserved.
Preventice Services, LLC and Preventice Technologies, Inc. are wholly owned subsidiaries of Preventice Solutions, Inc.
BEFORE the plastic
wire aligned with the left side of your neck, two finger
wire below and to the left of the black wire, under the
wire aligned with the right side of your neck, two finger
green
wire below and to the right of the white wire,
2
PULL Tab
important and should be done in the
3
RIGHT
first 60 seconds.
is removed from the
4
PULL