impulce 2 IT8001B Assembly Instructions Manual page 14

Step5 Assemble The Weight Plate
1)Insert the two Guide Rod (#24) into the Main Upright
(#1).
2)Slide the Weight Rubber Bumper(#32) down onto each
Guide Rod(#24).
3)Carefully begin sliding the Weight Plates one by one
in sequence: #33, #34, #35,#36
4)Align both top ends of the Guide Rods(#24) to the Main
Upright (#1) and secure them. Using:
Two Allen Bolts M10×75(#55)
Two Washers 11× 20×2(#67) Φ
Two Spring Washers
Two Rubber Caps
1 2
Φ
10 (#69)
Φ
Φ 25.5×22(#41)