Table of Contents
Advertisement
` Realtek PCIe GBE Family Controller
This sub-menu provides information on LAN configuration and related configuration options.
` Trusted Computing
Enables or disables Trusted Platform Module (TPM).
` IT8686 Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the parallel port.
` Hardware Monitor
& CPU Temperature/System Temperature
Displays current CPU/system temperature.
& System Fan Speed
Displays current system fan speeds.
& VCCGI/VCC3/+12V/VCC/Vnn/DDR_VDDQ
Displays the current system voltages.
` IT8686SEC Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port.
` SIO Misc Functions
& AC BACK
Determines the state of the system after the return of power from an AC power loss.
The system returns to its last known awake state upon the return of the AC power.
Memory
Always On
The system is turned on upon the return of the AC power.
Always Off
The system stays off upon the return of the AC power. (Default)
& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Open", otherwise it will show "Close."
To clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings
to the CMOS, and then restart your system.
& Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. (Default)
Disabled
Clears the record of previous chassis intrusion status and the Case Open field will
Enabled
show "No" at next boot.
& Case intrusion Prompt
Allows you to determine whether to display chassis intrusion notification at system startup. (Default: Disabled)
` CPU Configuration
` CPU Power Management
& EIST
Enables or disables Enhanced Intel
EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease
average power consumption and heat production. Auto lets the BIOS automatically configure this setting.
(Default: Enabled)
& Turbo Mode
Allows you to determine whether to enable the Intel
& C-States
Enables or disables support for C-States. (Default: Enabled)
Speed Step Technology (EIST). Depending on CPU loading, Intel
®
CPU Turbo Boost technology. (Default: Enabled)
®
- 23 -
®
Advertisement
Table of Contents
