Before Washing For The First Time; Checking Water Hardness; Basic Settings - Asko DFI643 Operating Instructions Manual

Hide thumbs Also See for DFI643:
Table of Contents

Advertisement

Before washing for the
first time

1. Checking water hardness

Contact the local water utility to check the water hardness in your area.
This is important with regard to how much detergent and rinse aid to
use.
4

2. Basic settings

To switch on the dishwasher, press and hold the main power switch
until the display lights up.
"Welcome to your new ASKO. This is a first time set up." is shown
on the display. It is important that you choose the right settings to en-
sure good dishwashing results.
Main power switch
Settings
1
Language
Select the language to be shown on the display.
2
Rinse aid 0/1/2/3/4/5
By using rinse aid you will improve your drying result. You will also
achieve a better dishwashing result with glassware and dishes.
Select rinse aid dosage. The rinse aid dispenser can be adjusted
between 0 (Off) and 5 (High dosage).
Pre-selected at factory: 5
To change the chosen setting, see the chapter Settings.
Select setting
Confirm setting

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents