HP ProDesk 400 G4 SFF Hardware Reference Manual page 42

3. Slide the security cable through the security cable fastener.
NOTE:
in step 1.
4. If your workstation configuration includes a monitor that you want to secure, pull the two scissor hands
of the monitor lock apart and insert the lock into the security slot on the rear of the monitor (1), close
the scissor hands together to secure the lock in place (2), and then slide the cable guide through the
center of the monitor lock (3).
34 Chapter 2 Hardware upgrades
This step is not necessary if you looped the security cable around a stationary object as shown