Display; Number Codes; Start; Add A Minute - KitchenAid KBMS1454R Use & Care Manual
Built-in microwave oven
Hide thumbs
Also See for KBMS1454R:
- Use and care manual (16 pages) ,
- Installation instructions manual (8 pages) ,
- Technical education (68 pages)
Table of Contents
Advertisement
Display
When power is first supplied to the microwave oven, a “:” will
blink on the display. Touch CANCEL-OFF to stop the blinking.
If the “:” blinks on the display at any other time, a power failure
has occurred. Touch CANCEL-OFF and reset the clock if needed.
If “RETRY” blinks on the display for 1 second, an invalid value
has been entered. Retry your entry.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use, the display shows the time of day or Timer
countdown.
Number Codes
The microwave oven is preset with shortcut number codes. A
number code includes one or more of the following: cooking
power, cook time and food quantity or weight. See the charts in
the “Cooking” and/or “Reheating” sections for additional
information.
Start
The START pad begins any function. If nonsensor cooking is
interrupted, touching START will resume the preset cycle.
Add a Minute
Cook time may be added in 1-minute increments, up to
99 minutes, by touching ADD A MINUTE.
Touching ADD A MINUTE during a cook cycle will add 1 minute
of cook time at the current cook power.
Touching ADD A MINUTE when the microwave oven is not in use,
or after a cook cycle has ended, will start the microwave oven for
1 minute of cook time at 100% cook power.
Cancel/Off
The CANCEL/OFF pad clears any incorrect command and
cancels most functions except for the Control Lock and Demo
Mode. It will not erase the time of day.
The oven will also turn off when the door is opened. Close the
door and press START to resume the cycle. A sensor cooking
cycle may not be resumed if interrupted by opening the door.
Clock
This is a 12-hour clock, and does not show a.m. or p.m.
To Set:
1. Press SELECT dial for 5 seconds.
2.
The Clock display may be turned off. While off, the Clock
continues to keep the correct time.
To Turn Clock On/Off: Press SELECT dial for 5 seconds. Turn
dial to “Clock on/off.”
Options
The following options are available by pressing SELECT:
Clock may be set or turned on or off.
Weight units may be set to either oz or lbs.
Amount units may be set to pcs, cups or servings.
To Use:
1. Press and hold SELECT.
2.
3.
4.
Tones
Tones are audible signals, indicating the following:
One tone
Valid entry (short tone)
Two tones
Reminder, repeat each minute after the end-of-cycle tones
Hidden feature has been entered or exited
Three tones
Invalid entry
Four tones
End of cycle
To Turn Off/On Valid Entry Tones: Touch and hold the number
pad 1 for 5 seconds until 2 tones sound. Repeat to turn tones
back on.
To Turn Off/On All Tones: Touch and hold the number pad 2 for
5 seconds until 2 tones sound. Repeat to turn tones back on.
Demo Mode
The Demo Mode is ideal for learning how to use the microwave
oven. When set, functions can be entered without actually turning
on the magnetron. The microwave oven light will come on, the
fan will run and, if on, the turntable will rotate.
To Turn On/Off:
Control Lock
The Control Lock shuts down the control panel pads to prevent
unintended use of the microwave oven.
When the control panel is locked, none of the controls will
function.
To Lock/Unlock Control: Before locking, make sure the
microwave oven is off. Touch and hold CANCEL/OFF for 5
seconds until 1 tone sounds and “LOCKED” appears on the
display. Repeat to unlock and clear the display.
Page 7
Advertisement
Table of Contents
