CONTOUR NEXT LINK 2.4 User Manual page 8

Meter Send Options
onnected, you set your Send Options. This controls 18. After the meter and pump are connected, you set your Send Options. This controls
cose readings to your MiniMed insulin pump. how your meter sends blood glucose readings to your MiniMed insulin pump.
Your options are:
nd results Always Meter will always send results
efore sending results Meter will ask you before sending results
Ask Me
d results Never Meter will never send results
for you. Press the Send Option that is best for you.
SEND OPTIONS
ur choice can be changed later using Setup (see
Automatically send
age 42).
results to the Pump?
Send Options set.
Meter will always
9. Press OK.
send results.
Date and Time Format
and time are displayed on your meter. If you are not In this step, you select how the date and time are displayed on your meter. If you are not
essed Skip in Step 5 of Initial Setup), you are asked to connected to a pump (e.g., if you pressed Skip in Step 5 of Initial Setup), you are asked to
e, followed by the time. accept or change the displayed date, followed by the time.
controls the date and time. If they need to be NOTE: Your pump automatically controls the date and time. If they need to be
r MiniMed insulin pump user guide. The date changed on your pump, see your MiniMed insulin pump user guide. The date
applies to the meter only. format you choose on the meter applies to the meter only.
DATE FORMAT
0. The Date Format screen appears on your meter.
Choose your date format.
SELECT Month/Day/Year
Day.Month.Year
DATE/TIME
Date / Time is set
1. Press OK.
by Pump.
10:30 AM | 10/13/11
AutoLog
our test result as The AutoLog feature lets you mark your test result as
After Meal No Mark Fasting Before Meal
toLog turned OFF. Your meter comes preset with AutoLog turned OFF.
AUTOLOG
2. When the AutoLog screen appears, press Accept to
keep AutoLog OFF. Or, to activate AutoLog, select AutoLog is Off.
Turn On.
10
Turn On
85587269_CntrNextLINK_2_4_UG_EN_FpBp_v5_UnMaskedPlaced.pdf:14
85587269_CntrNextLINK_2_4_UG_EN_FpBp_v4.indd 10
Always
Your choice can be changed later using Setup (see
Ask me
page 42).
Never
OK 19. Press OK.
20. The Date Format screen appears on your meter.
Choose your date format.
OK 21. Press OK.
After Meal No Mark
22. When the AutoLog screen appears, press Accept to
keep AutoLog OFF. Or, to activate AutoLog, select
Accept
Turn On.
11/18/16 9:03 AM
High and Low Alerts High and Low Alerts
The High and Low Alert feature tells you when your test result is above or below the settings The High and Low Alert feature tells you when your test result is above or below the settings
you choose. Results above High are marked High Blood Sugar. Results below Low are you choose. Results above High are marked High Blood Sugar. Results below Low are
marked Low Blood Sugar. Alerts appear as large orange numbers. marked Low Blood Sugar. Alerts appear as large orange numbers.
Talk to your health care professional before setting any High or Low Alerts on Talk to your health care professional before setting any High or Low Alerts on
your meter. your meter.
Your meter comes preset with a high alert level of 250 mg/dL and a low alert level of Your meter comes preset with a high alert level of 250 mg/dL and a low alert level of
70 mg/dL. You can Accept or Change these levels. 70 mg/dL. You can Accept or Change these levels.
NOTE: Alerts can only be set outside your selected Target Range(s). For additional NOTE: Alerts can only be set outside your selected Target Range(s). For additional
information, you may contact Customer Service. Contact information for Customer information, you may contact Customer Service. Contact information for Customer
Service is on the back cover. Service is on the back cover.
HIGH AND LOW ALERTS HIGH AND LOW ALERTS
mg/dL mg/dL
High: 250 High: 250
mg/dL mg/dL
Low: 70 Low: 70
NOTE: Your Target Ranges must be within your High and Low Alert levels. You set NOTE: Your Target Ranges must be within your High and Low Alert levels. You set
your Target Ranges next. your Target Ranges next.
HIGH AND LOW ALERTS HIGH AND LOW ALERTS
mg/dL mg/dL
High: High: 250 250
mg/dL mg/dL
Low: 70 Low: 70
HIGH AND LOW ALERTS HIGH AND LOW ALERTS
mg/dL mg/dL
High: 251 High: 251
mg/dL mg/dL
Low: Low: 70 70
NOTE: Press and hold the L or M button to scroll through the numbers faster. NOTE: Press and hold the L or M button to scroll through the numbers faster.
Alerts are set. Alerts are set.
mg/dL mg/dL
High: 251 High: 251
mg/dL mg/dL
Low: 69 Low: 69
11/18/16 9:03 AM 85587269_CntrNextLINK_2_4_UG_EN_FpBp_v4.indd 11 85587269_CntrNextLINK_2_4_UG_EN_FpBp_v4.indd 11
WARNING WARNING
23. Select Accept to keep the preset alert levels. If you 23. Select Accept to keep the preset alert levels. If you
Accept Accept
wish to change these alert levels, press Change. wish to change these alert levels, press Change.
Change Change
24. If you selected Change, press the L or M button to 24. If you selected Change, press the L or M button to
OK OK
select your High Alert level. This can be set between select your High Alert level. This can be set between
126 – 360 mg/dL. Press OK. 126 – 360 mg/dL. Press OK.
25. Press the L or M button to select your Low Alert 25. Press the L or M button to select your Low Alert
OK OK
level. This can be set between 54 – 99 mg/dL. level. This can be set between 54 – 99 mg/dL.
Press OK. Press OK.
26. The next screen confirms your choices. Press Accept 26. The next screen confirms your choices. Press Accept
Accept Accept
to confirm your Alert settings. to confirm your Alert settings.
Change Change
11 11
11/18/16 9:03 AM 11/18/16 9:03 AM