Test Results - CONTOUR NEXT LINK 2.4 User Manual

Apply More Blood
STRIP UNDERFILLED
the first blood drop is not enough, the meter will beep
wice and display "STRIP UNDERFILLED" and "APPLY MORE
LOOD NOW." You have about 30 seconds to apply more
APPLY MORE BLOOD NOW
ood to the same strip.
Too Little Blood
you do not re-apply enough blood within about 30
Remove used strip.
econds, you will see a screen telling you to remove the
Repeat test with new
rip and repeat with a new strip.
strip.
E01

Test Results

Testing With AutoLog Off
TESTING...
fter applying blood to the test strip when AutoLog is
urned OFF, your result will appear after the 5 second
5
ountdown.
167
Always was selected in Send Options during Setup,
167 YOUR RESULTS
our result is automatically sent to your pump. If Never mg
dL
as selected in Send Options, you will not have the
ption to send the result to your pump. If Ask Me was
Don't Send
elected in Send Options, you can choose to send your
d sugar test. Press Send or Don't Send. If Send is chosen, result to your pump after each blood sugar test. Press Send or Don't Send. If Send is chosen,
creen. press OK on the Send confirmation screen.
end a bolus to your pump (see page 25), set an Leave the test strip in the meter to send a bolus to your pump (see page 25), set an
(see page 28), or add a note (see page 30). optional reminder for your next test (see page 28), or add a note (see page 30).
10:30 AM | 10/13
167
mg
dL
Reminder
Sent
p from the meter. Press and hold the top Menu button to If you are done, remove the test strip from the meter. Press and hold the top Menu button to
rns off after 3 minutes of inactivity. turn off the meter. The meter also turns off after 3 minutes of inactivity.
ay on your pump to ensure that the glucose result CAUTION: Always check the display on your pump to ensure that the glucose result
ult shown on the meter. shown agrees with the glucose result shown on the meter.
®
16
85587269_CntrNextLINK_2_4_UG_EN_FpBp_v5_UnMaskedPlaced.pdf:20
85587269_CntrNextLINK_2_4_UG_EN_FpBp_v4.indd 16
If the first blood drop is not enough, the meter will beep
twice and display "STRIP UNDERFILLED" and "APPLY MORE
BLOOD NOW." You have about 30 seconds to apply more
blood to the same strip.
If you do not re-apply enough blood within about 30
seconds, you will see a screen telling you to remove the
strip and repeat with a new strip.
After applying blood to the test strip when AutoLog is
turned OFF, your result will appear after the 5 second
countdown.
If Always was selected in Send Options during Setup,
your result is automatically sent to your pump. If Never
Send
was selected in Send Options, you will not have the
option to send the result to your pump. If Ask Me was
selected in Send Options, you can choose to send your
Bolus
Notes
11/18/16 9:03 AM
Testing With AutoLog On Testing With AutoLog On
AUTOLOG AUTOLOG
Fasting Fasting
Before Meal Before Meal
After Meal After Meal
No Mark No Mark
NOTE: NOTE:
• Your test result does not display until you make an AutoLog selection. • Your test result does not display until you make an AutoLog selection.
• If your result is above or below your High or Low Alert settings, you will see your • If your result is above or below your High or Low Alert settings, you will see your
result without pushing a button. result without pushing a button.
Use the Fasting marker when testing blood sugar levels after fasting (no Use the Fasting marker when testing blood sugar levels after fasting (no
Fasting Fasting
food or drink for 8 hours, except water or non-caloric beverages). food or drink for 8 hours, except water or non-caloric beverages).
The Before Meal marker can be used when testing blood sugar levels The Before Meal marker can be used when testing blood sugar levels
Before Meal Before Meal
within 1 hour before a meal. within 1 hour before a meal.
The After Meal marker can be used when testing blood sugar levels within The After Meal marker can be used when testing blood sugar levels within
After Meal After Meal
2 hours after a meal. 2 hours after a meal.
You can select No Mark if you are testing at times other than before or You can select No Mark if you are testing at times other than before or
No Mark No Mark
after a meal or fasting. after a meal or fasting.
If you make your AutoLog selection very quickly, you may see the remainder of the testing If you make your AutoLog selection very quickly, you may see the remainder of the testing
countdown. countdown.
167 167
167 167 YOUR RESULTS YOUR RESULTS
mg mg
dL dL
Don't Send Don't Send
Before Meal Before Meal
result to your pump after each blood sugar test. Press Send or Don't Send. If Send is chosen, result to your pump after each blood sugar test. Press Send or Don't Send. If Send is chosen,
press OK on the Send confirmation screen. press OK on the Send confirmation screen.
Select Bolus to send a bolus to your pump. Select Reminder to set a reminder for your next Select Bolus to send a bolus to your pump. Select Reminder to set a reminder for your next
test. Select Notes to add more information to the result. test. Select Notes to add more information to the result.
10:30 AM | 10/13 10:30 AM | 10/13
167 167
mg mg
dL dL
Reminder Reminder
After Meal After Meal
If you are done, remove the test strip. To turn off the meter, press and hold the top Menu If you are done, remove the test strip. To turn off the meter, press and hold the top Menu
button. Or, after 3 minutes of inactivity, the meter turns off automatically. button. Or, after 3 minutes of inactivity, the meter turns off automatically.
11/18/16 9:03 AM 85587269_CntrNextLINK_2_4_UG_EN_FpBp_v4.indd 17 85587269_CntrNextLINK_2_4_UG_EN_FpBp_v4.indd 17
After you apply blood to the test strip, use the M to select After you apply blood to the test strip, use the M to select
Fasting, Before Meal, After Meal, or No Mark, and then Fasting, Before Meal, After Meal, or No Mark, and then
OK OK
press OK. (Scroll down to see No Mark.) press OK. (Scroll down to see No Mark.)
Your test result appears as a large number and then Your test result appears as a large number and then
changes to the usual test result screen. changes to the usual test result screen.
If Always was selected in Send Options during Setup, If Always was selected in Send Options during Setup,
your result is automatically sent to your pump. If Never your result is automatically sent to your pump. If Never
Send Send
was selected in Send Options, you will not have the was selected in Send Options, you will not have the
option to send the result to your pump. If Ask Me was option to send the result to your pump. If Ask Me was
selected in Send Options, you can choose to send your selected in Send Options, you can choose to send your
Bolus Bolus
Notes Notes
17 17
11/18/16 9:03 AM 11/18/16 9:03 AM