Front Panel - TC Electronic Finalizer 96K User Manual

FRONT PANEL

POWER
»Easy touch«
Turn on the machine with
a single light touch. To
turn off the machine you
must press and hold
down the POWER key
approx. 3 seconds until
the display reads
“Finalizer”.
Copy presets to/from a
standard memory card.
S-RAM Type 1 PCMCIA
cards, with a minimum of
64KB and a maximum of
2MB memory.
6
OVERLOAD
48000Hz
44100Hz
32000Hz
MIDI IN
CARD
WORKING
EDITED
Indicates internal overload.
In the Tool/Flow menu you
can see exactly where the
overload occurs.
48000Hz
44100Hz
32000Hz
If no valid Clock Rate is pre-
sent all three LEDs will blink.
MIDI receive indicator.
Indicates when data is trans-
ferred to or from the card.
Indicates when brief
calculations take place.
Preset has been edited.
High resolution meters
OUTPUT
L
dB -60 -48 -44 -40 -36 -32 -30 -28 -26 -24
R
Normalizer LIM
INPUT
L
dB -60 -40 -30 -24 -18 -12 -9 -6 -3 -0
R
Range:
-60dBFS to Indicates
0dBFS. when the
Expander is
active.
Indicates when
the Soft Clipper
is active
SOFTCLIP
-22 -20 -18 -16 -14 -12 -10 -8 -6 -5 -4 -3 -2 -1 -0.5 0
EXP dB GAIN REDUCTION LIM
HI
-24 -20 -16 -12 -10 -8 -6 -4 -2 -1
MI
-24 -20 -16 -12 -10 -8 -6 -4 -2 -1
Indicates the
amount of
Compressor gain
reduction.
Indicates when
the Limiter is
active.