MasterCraft 046-0266-0 Instruction Manual page 42

42
model no. 046-0266-0 | contact us 1-800-689-9928
D. Erasing all the Remote Controls from Opener
Note: To erase any unwanted remote controls, first erase all remotes.
1. Press the [SET] button for 15 seconds.
When the LED display flashes "E", release
the [SET]button.
2. Press the [SET] button again to confirm
all the programmed remotes have been
erased.
3. The dot in the LED display stays on
indicating that erasing the programmed
remotes has been successful.
headline bars headline bars
continuation tabs continuation tabs
notes notes
warnings warnings
ERASE WIRELESS
CONTROL
(FLASHING)