MasterCraft 046-0266-0 Instruction Manual page 14

14
model no. 046-0266-0 | contact us 1-800-689-9928

Attach the T-Rail to the Opener
Raise the pulley end of the rail so the rail can sit on the motor unit properly. Attach the rail to the motor
unit by tightening 2 screws. Insert a bolt to the stop bolt hole and secure it with nut.

Apply the Safety Label
‘
Prepare the Belt
Lay the belt down on the floor as shown. Do not twist the belt.
To Motor Unit
CAUTION
• Use only the specified bolts to attach the T-rail to the opener. Any other bolts will cause serious damage
to the opener.
headline bars
continuation tabs
notes
warnings
Belt Belt Traveller
To Door