Technical Specifications - NVT NV-FLX-024 Quick Install Manual

Technical Specifications

FLEX24 Switch Technical Specifications
Model
Dimensions
Weight
Mounting
Processor
Memory
Interface: Ethernet uplink (Trunk
IP)
Interface: Downlink (PoE and IP
to adapter)
Management
Power supply
Power output
Power consumption
Power injection (PoE)
PowerWISE power sharing
®
Operating temperature
Humidity
P/N: 451-2124-001-A
Printed in Canada
FLEX24
19 inches x 1U Without rack ears: 4.45cm x 43.5cm x 25.2cm, (HxWxD) 1.75"
x 17.13" x 9.92" (HxWxD)
3.34 kg (7.36 lb.)
Standalone or rack or shelf-mountable
2 brackets included for installation
Broadcom BCM56018 switch processor, 266MHz
32MB FLASH, 64MB DDR SDRAM
Maximum 2 uplinks, each 1Gb/s (full duplex), either:
2 mini-GBIC ports: 1000 Base-TX/SX/LX/EX/ZX/LHX (determined by SFP,
transceiver module installed), Ethernet IEEE 802.3z, fiber optic cable, or
2 RJ45 ports: 10/100/1000 Base-T autosensing, independent speed selection,
Ethernet IEEE 802.3, CAT5e copper cable
24 x RJ45 Jacks
Speed: 10/100Mb/s (full duplex)
PoE power: 50 Watts Maximum per port
Maximum distance:
Mode Cable
Standard 2 pair x CAT5
1 LAN port (MGMT): RJ45, 10/100 Base-T autosensing, IEEE 802.3
1 UART console port: RJ45 to DB9 cable
Hot-Swappable Power Supply Unit
Autosensing 100-240VAC, 50/60 Hz
500W max at 100VAC,
1000W max at 240VAC
20W
DC voltage: 48VDC to 56VDC
IEEE 802.3af/at
Cisco UPoE compatible
2 male connectors (rear), DC IN and DC OUT: 48VDC to 56VDC
-10°C to +50°C
10% to 95% (non-condensing) at 35° C
Data Rate Reach
10/100 Mbps 100m / 328'
Model NV-FLX-024
Quick Install Guide
8