System Grounding (Earthing); Compliance And Environmental Information; Technical Support - NVT NV-FLX-024 Quick Install Manual

Flex 24 port managed switch
Table of Contents

Advertisement

System Grounding (Earthing)

General Grounding
WARNING: GROUND ALL SYSTEMS ACCORDING TO THESE INSTRUCTIONS
BEFORE YOU CONNECT POWER LEADS. FOLLOW GROUNDING INSTRUCTIONS
EXPLICITLY TO ENSURE THE SAFETY OF PERSONNEL.
Cabinets always require redundant and independent equipment grounding conductors between the
cabinet and the wiring system ground: an insulated grounding conductor and a supplementary
(protective) ground.
Grounding Conductor
The grounding conductor is provided as part of the three-wire, 15-Amp, AC-power cord set included
with the equipment. If the power cord must be replaced, use a power cord of the same gauge that has
the same insulation, number of conductors, and usage ratings.
Protective Grounding Conductor
Install the protective grounding conductor to the system.
The ground symbol within a circle identifies the terminal to be connected to an external
protective conductor. Connect this terminal to earth ground before you make any other
connections to the equipment.
The protective grounding conductor must be:
An Insulated wire, #5 (13mm2) to #14 (2mm2) AWG, with green and yellow stripes
Connected to the grounding stud on the back of the cabinet.

Compliance and Environmental information

All the compliance and environmental information is available on
www.nvt.com.

Technical Support

The Phybridge Technical Support Group is available to assist you with product installation, configuration,
monitoring and troubleshooting procedures. Should you experience trouble with this equipment or for
repair or warranty information, please contact Phybridge Inc. at +1 905.901.3633 or
support@phybridge.com.
The NVT Technical Support Group is available to assist you with product installation, configuration,
monitoring and troubleshooting procedures. Should you experience trouble with this equipment or for
repair or warranty information, go to
support@nvt.com.
www.nvt.com
for support and contact information or email
www.phybridge.com
and
Model NV-FLX-024
Quick Install Guide
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents