Table of Contents
Advertisement
Chapter 2
Menu Display
Figures and illustrations below are provided for reference only and may differ from actual product appearance.
Initial Setup
The Setup Wizard appears the first time you turn on the
TV, and assists you to specify the Air/Cable setting, and
program your channels automatically.
IMPORTANT: Make sure you are connected to an antenna
or cable TV system.
1. To turn on the TV, press
seconds for a picture to appear on screen.) The Initial
Setup Wizard begins.
2. Press
to select your language, then select go to
next step to confirm your "Time Zone" and "Daylight
Saving" setting. Then "Go to next step".
3. Press
to select "Air" or "Cable" then select "Go to
next step".
4. Press
to select Scan and then select "Go to
next step" to start the channel search function. All
available TV channels will be stored. This operation
takes a few minutes. Auto Channel Scan will begin.
After the scan is completed, a TV channel will appear
on the screen.
EN 14
. (It may take approx. 10
Archivos
• Depending on the reception condition, it may take up
to 30 minutes to complete scanning channels. Please
allow the process to complete without interruption.
Note: During the setup, you can follow the navigation
help available at the bottom of the screen.
Source
Includes TV, AV, HDMI1, HDMI2 and HDMI3 (see Figure
2). Press
to select the input source, then press OK
to confirm your choice.
TV Operation
Advertisement
Table of Contents
