Motorola MDC10W User Manual page 7

• There are two ways to install MDC10W in your
car:
Suction mount
Sun visor mount
Getting Started
1. Screw the MDC10W into
the mounting bolt of the
Suction mount.
2. Press the suction cup of
the Suction mount against
the windshield, and press
the lever to lock. Ensure
that the mount is safely
attached to the windshield.
3. Set your desired recording
angle and lock into position
by tightening the lock nut.
1. Screw the MDC10W into
the mounting bolt of the
Sun visor mount.
2. Push the clip of the Sun
visor mount to the sun
visor.
7