Mazda CX-3 2018 Owner's Manual page 224

When Driving
i-ACTIVSENSE
Changing the Set Vehicle Speed
Changing the set vehicle speed using the
SET switch
Press the SET switch to accelerate.
Press the SET switch to decelerate.
The set vehicle speed changes as follows
each time the SET switch is pressed.
Short press
Long press
NOTE
For example, the set vehicle speed is
changed by pressing the SET switch four
times as follows:
The vehicle speed accelerates or
decelerates by 4 km/h (4 mph).
To accelerate using the accelerator
pedal
Depress the accelerator pedal and press
and release the SET or SET switch at
the desired speed. If a switch cannot be
operated, the system returns to the set
speed when you release your foot from the
accelerator pedal.
CAUTION
The warnings and brake control do not
operate while the accelerator pedal is
depressed.
4-100
CX-3_8GA5-EA-17F_Edition1
1km/h (1 mph)
10 km/h (5 mph)
NOTE
When accelerating using the SET
•
switch while in headway control, the set
vehicle speed can be adjusted but
acceleration is not possible. If there is
no longer a vehicle ahead, acceleration
continues until reaching the set vehicle
speed. Check the set vehicle speed by
viewing the set vehicle speed display in
the active driving display.
While depressing the accelerator pedal,
•
the color of the MRCC indication
changes from green to white.
The minimum settable speed is 30 km/h
•
(19 mph). If the set vehicle speed
reaches 30 km/h (19 mph) using the
switch operation, constant speed travel
is maintained at about 30 km/h (19 mph)
even if the SET switch is pressed. The
MRCC system is not canceled.
To Deactivate
The MRCC is deactivated when the
OFF/CAN switch is pressed twice.
When the system is temporarily
canceled
In the following cases, the MRCC is
temporarily canceled, the MRCC set
indication (green) is turned off, and the
MRCC main indication (white) is turned
on.
The OFF/CAN switch is pressed once.
•
The brake pedal is depressed.
•
The parking brake is applied.
•
(Automatic transaxle)
•
The selector lever is shifted to park (P),
neutral (N) or reverse (R).
(Manual transaxle)
•
The shift lever is in the reverse (R)
position.
2017-4-7 15:30:54