Mazda CX-3 2018 Owner's Manual page 157

If the automatic transaxle fluid (ATF)
•
temperature becomes too high, there is
the possibility that the transaxle will
switch to automatic shift mode,
canceling manual shift mode and
turning off the gear position indication
illumination. This is a normal function
to protect the AT. After the ATF
temperature has decreased, the gear
position indication illumination turns
back on and driving in manual shift
mode is restored.
▼ Manually Shifting Up
You can shift gears up by operating the
selector lever or the steering shift
*
switches .
M1 → M2 → M3 → M4 → M5 → M6
Using selector lever
To shift up to a higher gear, tap the
selector lever back
CX-3_8GA5-EA-17F_Edition1
once.
Automatic Transaxle
Using steering shift switch
To shift up to a higher gear with the
steering shift switches, pull the UP switch
( ) toward you once with your
fingers.
UP switch
WARNING
Keep your hands on the steering wheel rim
when using fingers on the steering shift
switches:
Putting your hands inside the rim of the
steering wheel when using the steering
shift switches is dangerous. If the driver's
air bag were to deploy in a collision, your
hands could be impacted causing injury.
NOTE
When driving slowly, the gears may not
•
shift up.
*Some models.
When Driving
*
4-33
2017-4-7 15:30:54