elero RevoLine M RolTop M6 User Manual

RolTop Roller Blind Drive

Table Of Contents

13 Operating and installation instructions
14 General for instructions
14.1 Standards and Directives
14.2 Intended use
14.3 Foreseeable misuse
14.4 Warranty and liability
14.5 Customer service of the manufacturer
15 Safety
15.1 General safety instructions
15.2 Layout of the safety guidelines
16 Product description
17 Assembly
17.1 Mechanical fastening
17.2 Electrical connection
17.3 Connection example, RolTop 230 V/50 Hz
17.4 Parallel connection
17.5 Commissioning
17.6 Setting the end positions and the relief
17.6.1 Relief function for the end position(s)
17.6.2 Relief function at the upper stop
17.6.3 Relief function at the lower stop
17.6.4 Changing / Deleting the limit positions
and deleting the discharge function
17.6.5 Four variants of end position settings
17.6.6 Variant A: Upper and lower end position freely adjust-
able
17.6.7 Variant B: Fixed upper limit stop / lower
end position freely adjustable 6
17.6.8 Variant C: Fixed upper and lower limit stop
17.6.9 Variant D: Upper end position freely
adjustable, fixed lower limit stop
18 Troubleshooting
19 Repair
20 Repair
21 Manufacturer's address
22 Disassembly and disposal
23 Conformity Declaration
24 Technical data and dimensions
1 24.1 RevoLine M
1 24.2 RevoLine S
1 24.3 RevoLine M RH
1 24.4 RevoLine L
2
2
2
2
2
2
3
RolTop Roller Blind Drive
3
13 Operating and installation instructions
3
Please keep these operating instructions for later use, to be
available throughout the life of the product!
4
The German manual is the original version.
4
All other documents represent the language translations of
4
the original text.
All rights in the case of a patent, utility model or ornamental
4
design registration are reserved.
4
14 General for instructions
5
The content structure is based on the life cycles of the elec-
tric motor drive (hereinafter referred to as "Product").
5
The manufacturer reserves the right to make changes to
5
the Specifications stated in these Operating Instructions
at any time. These may, in individual cases, be different
from the respective product version, however the functional
5
information will not undergo significant changes or become
invalid. The current version of the Specifications may be
5
requested from the manufacturer at any time. No claims
may be asserted against the manufacturer as a result of the
preceding sentence. Deviations from text or picture state-
5
ments are possible and depend on the technical develop-
ment, features, and accessories of the products. Deviating
information on special versions will be explained by the
manufacturer in the sales documentation. Other information
shall remain unaffected by these provisions.
6
14.1 Standards and Directives
During the design process, the basic health and safety
6
requirements of the applicable laws, Standards and Direc-
tives were complied with. The safety is confirmed by the
6
declaration of conformity (see "Declaration of Conformity").
All safety information in these Operating Instructions refer
7
to the laws and regulations currently applicable in Germany.
All instructions in the Operating Instructions shall be ob-
7
served without limitation and at any time. Beside the safety
instructions contained in these Operating Instructions, the
7
provisions for accident prevention, environmental protection
and occupational safety, which are applicable for the oper-
7
ating site, must be observed. Provisions and Standards for
the safety rating can be found in the Declaration of Con-
7
formity
7
8
9
10
10
138133301_EN_1116