Advertisement
Gpstracker.net.in
6.12.2 Cancel: send "nosuppress+password" to tracker, it will reply" nosuppress ok ".
6.13 Absolute street address by SMS
6.13.1 You must set up the APN of your local GSM network for the SIM card in tracker first before using this
function, if there is user name and password for GPRS login, Please refer to 6.36.1 and 6.36.2 to
configure the APN, user name and password for GPRS login.
6.13.2 After configure the APN, send "address+password" to device, it will reply SMS including real
street/address name. For example: No.113, Guankou 2nd Rd, Nantou, Nanshan district, Shenzhen,
Guangdong, china.
6.14 Location based service (LBS)
When the tracker device doesn't received valid GPS signals, tracker will positioning by location based
service(LBS), the messages includes the GPS coordinates of the last position in SMS mode, but the LAC
in message is the current new position, the location can be seen by input the LAC code in the menu
"Manual Track" of web platform www.gpstrackerxy.com, you can also send command
"address+password" to tracker to get the newest absolute address and GPS coordinates as well; tracker
will automatically switch to track by location based service in GPRS mode, and actualized on the map of
web server with LBS mark. And there may be some inaccuracy with actual location by LBS tracking; the
bias depends on GSM reception.
Note: This feature can be used normally in most areas according to the signal of GSM network. It may
not be available in some areas.
6.15. Monitor
6.15.1 The command to switch between Track and Monitor are "tracker" and "monitor".
6.15.2 The default mode is "track" (Track mode).
6.15.3 Send SMS "monitor+password" to the unit, and it will reply "monitor ok!" and switch to "monitor"
mode.
6.15. 4 Send SMS "tracker+password" to the unit, it will reply "tracker ok!" and restore to "track" mode.
6.16 Data logging
6.16.1 Auto logging：When the tracker device lost GSM signals or fall offline from GPRS, tracker will log the
tracking position and alerts automatically in the SD card on the basis of the pre-set condition, when GSM
signals get back, all the event alerts will be auto-sent to the authorized numbers or monitoring platform
(server), but the logged tracking data should be loaded to the monitoring platform via SMS command.
6.16.2 Logging upon times: Send SMS: "save030s005n+password" to the tracker unit, it will reply "save ok",
and will log the lat, long locations every 30 seconds for 5 times. (S: second, m: minute; h: hour).
6.16.3 Multi-logging：Send SMS:"save030s***n+password" to tracker device, it will reply "save ok".
6.16.4 Logging Clearance: send SMS: "clear+password" to tracker device, it will reply "clear ok".
6.16.5 Logging Volume: It depends on the capacity of the SD card inserted in the tracker device.
6.16.6 The logged data in SD card can be copied to computers through card reader, and then the data route can
be checked by importing data in the menu "Data Import" of web platform www.gpstrackerxy.com
Freedom is lost now...!
Advertisement
