Advertisement
Gpstracker.net.in
automatically when it is broken, no GSM reception or no GPRS.
6.4 Turn on the Tracker Device.
6.4.1 Connect the positive and negative wire, red and black ones, with 12V or 24V car power system, wait for 1
minute after connecting power to wait tracker works normal, and then turn on the backup battery switch.
6.5 GSM/GPS LED Indicator
6.5.1 Red LED indicator on: No GSM network signals.
6.5.2 Red LED indicator flashes fast (one time each second): GSM Network signal is normally, and tracker
works under GSM mode.
6.5.3 Red LED indicator flashes slowly (one time each three second): Tracker works under GPRS mode.
6.5.4 Green LED indicator on: GPS signal is normal.
6.5.5 Green LED indicator off: No GPS signals.
6.6 Initialization
Send SMS "begin+password" to the unit, it will reply "begin ok" and initialize all the settings to default factory
settings.（default password: 123456）
For example: send SMS "begin123456", it will reply "begin ok". (No quotation marks"" when sending all the
SMS)
6.7 Change Password
6.7.1 Send SMS " password+old password+space+new password" to the unit to change the password.
For example: send SMS "password123456 888888" to the unit. If succeeded, "password ok" will reply to
your cell phone from the device tracker.
6.7.2 Be sure to keep the new password in mind, you have to upload the software to restore the original setting
in case of losing the new password.
6.7.3 Attention: Make sure the new password is in 6 digits Arabic numbers, or else the tracker cannot recognize
the password.
6.7.4 The "+" in the command, please don't type "+", space means press the space keyboard on your cell
phone.
6.8 Authorization
There are 5 numbers to be allowed to authorize in the tracker at most.
6.8.1 Call and track the tracker device for 10 times from cell phone in success, it will make the cell phone
number as the authorized number automatically, and reply "add master ok".
6.8.2 Authorization: Send SMS "admin+password+space+cell phone number" to set up an authorized number,
the other authorized numbers should be set by the first authorized number, if the number is successfully
authorized, the unit will reply" admin OK" by SMS.
6.8.3 Delete authorization: Send SMS "noadmin+password+space+authorized number" to delete the authorized
number.
6.8.4 If you want to track the target tracker device when it enters into another country, you must add the country
code before the cell phone number, for example, send SMS "admin123456 008613322221111" to the
device. Note: 13322221111 will be set up as the authorized number.
Freedom is lost now...!
Advertisement
