Advertisement
Gpstracker.net.in
GSM Signal: 1-32 Notes: The higher digit it shows; the stronger of GSM signals it receives.
Oil: 70%
6.30 Reset Hardware
Send SMS "reset+password" to tracker device, it will reply "reset ok". And the GSM module and GPS
module in the tracker will be reset.
6.31 Sleep Mode
6.31.1 This function is deactivated as default, send "sleep+password+space+on", tracker will reply "sleep
on ok". When vehicle is not driving (ACC is OFF), GSM module fall asleep; GPS module shut off; and
tracker works in low power consumption. Calling, SMS command and any triggered alarm can awake it.
6.31.2 Cancel: Send "sleep+password+space+off", tracker will reply "sleep off ok", then tracker won't
sleep, GSM and GPS works all the time.
6.32 Check IMEI
Send SMS command "imei+password" to the unit. E.g. Send SMS command "imei123456" to the tracker
device, an IMEI number in 15 digits will reply to your cell phone.
6.33 Set up Terminal (local) Time
6.33.1 Send SMS command "time+space+zone+password+space+time" to the tracker unit, If succeed, It will
reply "time OK"
6.33.2 For example: Send SMS "time zone123456 8", 8 is Chinese time zone, If your country time zone is
minus, send SMS "time zone123456 -8".
6.34. TCP/UDP switch
Send command: "gprs+password,0,0" switch back to TCP mode, this is the default mode.
Second command:"gprs+password,1,1" switch to UDP mode.
6.35 Configure parameters by USB
Copy the Serial debugging tool (SSCOM.EXE) to computer, connect the tracker with computer and open
serial debugging tool with the USB cable (optional parts), then choose correct COM port, baud rate is 19200,
send serial port command (Tick "send new " on SSCOM interface): $SET GT PARA, tracker will return the
sample format of the command, send appropriate commands according to the sample format of command.
Tracker will return "ok" after succeeding in configuring to indicate successful configuration. For detailed
operations, please check "COM PORT COMMAND USER MANUAL"
6.36 Set up GPRS
User can send SMS via cell phone to set up APN, IP and port before starting tracking by GPRS.
6.36.1 Configure APN
APN differs from country to country. For more information about your local APN, please inquire with
your local GPRS network operator.
6.36.1.1 APN settings of the first SIM card: (External SIM card is the first SIM card)
Send SMS "APNONE+password+Space+your local APN" via a cell phone and if succeeded, the
tracker will return the message "APN OK".
6.36.1.2 APN settings of the second SIM card: (Internal SIM card is the second SIM card)
Freedom is lost now...!
Advertisement
