Unpacking And Handling; Opening The Packaging - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions For The Installer And The User

3 - Unpacking and handling

Opening the packaging

10 | © 2017 ABB | 1SDH000999R0002 - ECN000058721 - Rev. B
NOTE: to unpack the circuit-breaker safely refer to the instruction sheet in the zipped packaging
pouch.
The following is the procedure for opening the packaging:
1. Cut the tape that seals the box. See Figure 5 e Figure 6.
Figure 5
2. Open the upper part of the packing box and remove the upper containment protection. See Figure 7
e Figure 8.
Figure 7
Figure 6
Figure 8
Continued on the next page
Emax E1.2 circuit-breakers | 3 - Unpacking and handling
ABB | SACE Emax 2