Invacare Spectra XTR series User Manual page 49

1. On both sides, loosen and remove the upper backrest
screw A.
2. Set the required backrest angle in 3.8° steps.
Use scale B on the backrest for this purpose. Ensure
that you set the same angle on both sides.
3. Re-insert and tighten the screw.
Ensure you insert the screw through one of the holes
of the backrest bracket. The screw must be visible on
the inside of the bracket and the screw head must be
flush with the bracket.
Simple backrest
• 6 mm Allen key
1528224-T
1. On both sides, loosen and remove the middle backrest
screw A.
2. Set the required backrest angle in 7.5° steps.
Ensure that you set the same angle on both sides.
3. Re-insert and tighten the screw.
Setup
49