Invacare Spectra XTR series User Manual page 96

Invacare® Spectra XTR Series
5. If the backrest has an electrical recliner, refasten the
motor to the backpost.
CAUTION!
Injury hazard if the clevis pin of the motor
of the electrical recliner is not correctly
secured
An incorrectly secured pin can come off and
the backrest can unexpectedly fold back,
which can lead to injuries.
– Make absolutely sure that you insert the
R-clip to secure the clevis pin correctly.
The clip must fit snugly around the pin.
See the illustrations below:
6.
When inserting the battery boxes, please ensure that
the guide rods (1) fit exactly in the guide channels (2)
provided at the side of the battery boxes, and that they
are not underneath these.
96
Fig. 8-2
7. To do this, first place the front of the battery box on the
guide rods and then push the assembly in.
Once the wheelchair is reassembled, you must
ensure that the locking system on the rear
battery box has completely engaged. Check
the correct seating of the locking pins. Also
check the power supply. To do this, switch the
wheelchair on at the remote. If the electric
wheelchair is not ready to drive, check that the
battery box has been fitted correctly.
8.
Secure the battery belt with the safety clip (1).
1528224-T