Connector; Fan Power Connector: Sysfan1; Serial Ata Connector: Sata1 - MSI MS-98I0 Manual

Hardware Setup

Connector

Fan Power Connector: SYSFAN1

The fan power connector supports system cooling fan with +12V. When con-
necting the wire to the connectors, always note that the red wire is the positive
and should be connected to the +12V; the black wire is Ground and should be
connected to GND. If the motherboard has a System Hardware Monitor chipset
onboard, you must use a specially designed fan with speed sensor to take advan-
tage of the CPU fan control.

Serial ATA Connector: SATA1

This connector is a high-speed Serial ATA interface port. Each connector can
connect to one Serial ATA device.
Important
Please do not fold the SATA cable into a 90-degree angle. Otherwise, data loss
may occur during transmission.
2-8